An electronic “switch” that sits at the start of the lighting circuit and turns the 240v on/off at the same time issuing a 1-10v dim signal to the drivers. A typical application is a group of downlights on one circuit, each downlight has a 1-10v driver wired with 2 core control wire.
The Hue Connect 1-10v is seen in the Hue app and gives wireless control of the lighting circuit. Max 300w load or 8 x 1-10v drivers. Can also switch a load eg a 300w halogen pendant. Friends of Hue product.
The Dali version of the above. The drivers are always powered “on” and the Hue Connect Dali controls the on/off & dim function. Max 8 Dali drivers.
A constant current LED driver with builtin Hue control, wide selectable ampage and voltage range.
Hue Connect 1-10v is Friend of Hue. Hue Connect Dali & CC Driver are not; so do not have Siri / Home control. All Hue systems require a Hue bridge.
50 units (Lamps, Hue Connects, Hue strip) although we have successfully used up to 60 on a Bridge. Multiple Bridges can be used but in the Hue app you need to select the applicable Bridge. This mainly effects setup. 3rd party apps support multiple Bridges example is iConnect Hue.
Hue Connect 1-10v 2 core bell wire, Hue Connect Dali 2 core double insulated building wire, Hue Connect CC Driver none, just connect to the fixture.
Add Hue Connect 1-10v, Dali or CC Driver to your existing lighting, but you may need access for the control wire.
In our opinion phase control of LED should be avoided - see our blog on dimming. The Hue Connect system dims Led's to very low levels without flicker.
The easy answer is yes, there are some exceptions.
Yes, although we are happy to supply our fixtures as well.
Yes, we have used Hue in Boardrooms, offices, supermarkets, bars and restaurants. It is a very flexible system.
Yes, the Hue Hue Connect 1-10v and Hue app supports Siri, Alexa and Google
Yes, the Hue bridge provides your remote access
It is possible to have a complete installation without switches, after all that’s the point. If the Hue Connect ever needs resetting this can be done at the circuit breaker. If I built a new house today I would not have switches. If you want switches, install standard switches for each circuit.
The Bridge, Sensors and Dimmers are consumer supplied available from Australian & NZ retailers like JB-HI, Bunnings and online suppliers. The Hue Connect products are supplied by Modular Lighting & Partners, please ask for a quote.
No. Casambi is widely used excellent wireless lighting control system aimed at professional installations. It is based on Bluetooth and very scaleable for very large projects. More complex and may require an integrator. Casambi is a company, the system is not “open” so you can only use Casambi, other Bluetooth lighting control systems are not compatible. It is considerably more expensive than Hue. Modular Lighting & Partners can supply Casambi with their fixtures but we recommend you also consider Hue Connect before making your selection.
75 Hutchinson Street
St Peters NSW 2044
Call 1300 101 433
Send hq@modular.partners
Level 3/60 Reservoir Street
Surry Hills NSW 2010
By Appointment only
Rear of 43 Carrington Street
Nedlands WA 6009
(Access via Government Road)
Central House
Office 27, 101 Moray Street
South Melbourne VIC 3205
Call +61 1300 101 433
Warranty | Modular Lighting & Partners 2018-2022